16-year-old SATA II SSD survives 1 petabyte of writes — 25x more than the drive's endurance rating

[ad_1]

Everything in life has an expiry date, and that holds true even for the best SSDs on the market. A fascinating experiment conducted by the YouTube channel WolfyTech shows that SSDs are more durable than we think, even if they were released 16 years ago.

Over the course of the experiment, the channel wrote one petabyte of data to the drive, and the SSD, despite having over 60,000 hours of power-on time, continues to function and shows no signs of catastrophic failure.

Go deeper with TH Premium: AI shortages

(Image credit: Nvidia)

The NAND in SSDs gradually degrades over time as you write or erase data, similar to the wear and tear your car or virtually any other electronic device in your house experiences. Just as cars come with a manufacturer’s warranty defined by either years of use or a certain number of miles, whichever comes first, SSDs also come with a warranty defined by either years of use or a metric known as TBW (Terabytes Written).

However, there is a common misconception that when SSD exceeds its TBW rating, it will immediately stop working or become unusable. In reality, the TBW value is simply a guideline that manufacturers establish for warranty coverage. The statistical-based rating is not a definitive indicator of when the drive will fail. Contrary to popular belief, chipmakers don’t program NAND to self-destruct when it surpasses the TBW threshold.

Latest Videos From

To revisit the car analogy, just as a car can run fine beyond 100,000 miles, an SSD can continue to function after exceeding its TBW rating. However, just as older cars may require more frequent maintenance and become less predictable over time, SSDs that surpass their TBW threshold may gradually become less reliable. This is due to the physical wear that accumulates in the drive’s NAND flash memory cells through repeated Program/Erase (P/E) cycles.

I forced a 16-Year-Old 64GB SSD to write 1 PETABYTE (And it didn’t die) – YouTube

Watch On

Manufacturers engineer SSDs to run beyond the rated TBW by a significant margin, and the Sandisk P4 is a testament to that.

The P4, which launched in 2010 in various formats, including mSATA, primarily targeted OEMs of netbooks, tablets, or ultra-thin notebooks. In its defense, the P4, available in capacities from 4GB to 128GB, used 32nm MLC NAND. Although it’s on the archaic side, 32nm 2D MLC NAND is physically larger and can withstand more write cycles than today’s 3D TLC or QLC NAND.

Information on the P4 is slim, given that it was released more than a decade and a half ago. Nonetheless, we dug up an old specification sheet showing that the P4 64GB, the model used in WolfyTech’s experiment, has a 40 TBW endurance. Therefore, 1 PB or 1,000 TB of written data exceeds the TBW by 25X. The drive also logged over 60,000 power-on hours and over 1,100 power-ups. It would seem that the user created a workload that kept making cached writes to the SSD.

This isn’t the first time we’ve seen an SSD outlive the manufacturer’s specified TBW limit. If you look online, you’ll find many SSD endurance tests that challenge the conservative TBW numbers that vendor slap on their products. However, this particular case was pretty interesting, given that it was on an older drive with MLC NAND that has since disappeared from the market.

Even though your SSD will likely have a longer lifespan than its TBW rating, it doesn’t mean you should carelessly push your SSD to its breaking point. On the contrary, given the current market situation, you should be taking extra good care of your SSD.